OTHER INDUSTRIES
We have a skilled technical team, experts in materials, equipment and facilities, that is able to support your industry, ensuring quality and safety while minimizing risks to the environment.
With our expertise in technical inspections, laboratory tests, non-destructive testing, CE marking and certification, calibrations and training, our clients can take their enterprises ever further.
AVAILABLE SERVICES
Inspections
Consulting and Auditing
Laboratory Testing
Calibration
Energy and Infrastructure
NONDESTRUCTIVE TESTING (NDT)
OPERATIONS
Electrical Installations
+
TELECOMMUNICATIONS INSTALLATIONS
+
Fuel Installations
+
Gas Installations
+
Lifts, Escalators, Conveyor Belts and Good Lifts
+
In the field of electrical installations, IEP works on a wide range of activities, including inspections of electrical facilities, self-consumption system audits (inspection of implementation and installation of photovoltaic systems), metering system audits (validation of meters and ensuring communications are operational), measuring ground resistance, potential gradient, ground continuity and resistance, as well as issuing technical reports on electricity, including analyses of electrical facilities design projects.
In the regulatory area, specifically, as part of the electrical installations regime, as published in Decree-Law No. 96/2017 of August 10, and as an Inspection Entity for Electrical Installations, IEP conducts inspections of Type A and Type C electrical installations.
IEP has built a specific website for Electrical Inspections to submit inspection requests with automatic payments simply and effectively.
> LIGHTING NETWORK FAULT LOOP IMPEDANCE MEASUREMENTS
> ASSESSMENT OF STATE OF REPAIRSSESSMENT OF PERMANENT ACCESS CHAMBERS
> MEASUREMENT OF POTENTIAL GRADIENTS
> OPERATING EARTH ELECTRODE RESISTANCE MEASUREMENT
> VOLTAGE DROPS
> INITIAL INSPECTIONS
> ELECTRICITY METER INSPECTIONS
> SELF-CONSUMPTION SYSTEMS
> EXPERT REPORTS
> INSPECTION OF GENERATOR SETS
> CONTINUITY OF PROTECTIVE CONDUCTORS AND EQUIPOTENTIAL BONDING
> ANALYSIS OF ELECTRICAL POWER GRID DESIGN PROJECTS
> WORKSITE SUPERVISION (PERMANENT ACCESS CHAMBERS, POSTS)
> ASSESSMENT OF STATE OF REPAIR OF WOODEN POSTS
> SOIL RESISTANCE MEASUREMENTS
> PROTECTIVE EARTH ELECTRODE RESISTANCE MEASUREMENT
> PERIODIC INSPECTIONS
> DISTRIBUTION GRIDS
> PHOTOVOLTAIC SYSTEMS
> RESISTANCE OF ELECTRICAL INSTALLATION INSULATION
> EXPERT REPORTS ON POLARITY, VOLTAGE AND CURRENT
> RESIDUAL CURRENT DEVICE TRIPPING
> PROJECT ANALYSIS
IEP is accredited by the Portuguese Institute of Accreditation (IPAC) as an Inspection Body for Pressure Equipment (ESP) and Simple Pressure Vessels (RSPS), to carry out in-service inspections under Decree-Law No. 131/2019 of 30 August, and its Supplementary Technical Instructions (ITC).
Equipments:
Compressed Air Pressure Vessels
Steam generators and similar
Liquefied petroleum gas reservoirs (<200 000L)
ESP without applicable ITC
RSPS- Compressed air pressure vessels
> INITIAL INSPECTIONS
> INTERIM INSPECTIONS
> EXTRAORDINARY INSPECTIONS
> ANALYSIS OF REPAIR OR CHANGE DESIGN COMPLIANCE
> COMPLIANCE RE-EVALUATION
> PERIODIC INSPECTIONS
> APPROVAL OF REPARATIONS OR AMENDMENTS
> ANALYSIS OF INSTALLATION DESIGN COMPLIANCE
Conducting tests in line with the guidelines in the Manual for Telecommunications Infrastructures in Buildings – copper pair network, coaxial network and fiber-optic network.
Conducting tests in line with the guidelines for Telecommunications Infrastructure in Urban Developments.
Drafting test reports to support functionality reports issued by the installers.
Project execution supervision and drafting of technical reports on telecommunications.
> PROJECT ANALYSIS FOR TELECOMMUNICATIONS INFRASTRUCTURE IN BUILDINGS (ITIB)
> TESTING OF TELECOMMUNICATION INFRASTRUCTURE BUILDINGS
> FIBER OPTIC CABLE NETWORK
> COPPER PAIR NETWORKS
> PROJECT ANALYSIS FOR TELECOMMUNICATION INFRASTRUCTURE IN URBAN DEVELOPMENTS
> TESTING OF TELECOMMUNICATION INFRASTRUCTURE IN URBAN DEVELOPMENTS
> COAXIAL NETWORKS – CATV, MATV, SMATV
> EXPERT REPORTS
IEP is accredited by the Directorate-General for Energy and Geology and the Portuguese Institute for Accreditation as an Inspection Entity for Gas Installations.
Primary, periodic, extraordinary and other inspections of gas installations, under the regime of gas installations, as per the Decree-Law No. 97/2017 of August 10.
Technical reports on gas installation projects and on any other aspect of gas installations.
> PROJECT ANALYSIS
> FINAL INSPECTIONS
> INITIAL INSPECTIONS
> TECHNICAL ADVICE
> REGULAR INSPECTIONS
IEP is accredited by the Directorate-General for Energy and Geology and the Portuguese Institute for Accreditation as an Inspection Entity for Gas Installations.
Primary, periodic, extraordinary and other inspections of gas installations, under the regime of gas installations, as per the Decree-Law No. 97/2017 of August 10.
Technical reports on gas installation projects and on any other aspect of gas installations.
> PERIODICAL INSPECTIONS
> PROJECT ANALYSIS
> EXTRAORDINARY INSPECTIONS
> INITIAL INSPECTIONS
As a Notified Body, IEP assesses the compliance of lifts, with a view to their going into operation under Directive 2014/33/EU.
As an Inspection Entity for Lifts, IEP conducts periodic inspections of lifts, dumbwaiters, conveyor belts and escalators, as per the Decree-Law no. 320/2002, December 28.
Expert reports, technical audits and professional advice on all matters regarding lift installations.
Energy efficiency of lifting machinery.
> INITIAL INSPECTIONS
> EXPERT REPORTS ONON LIFTING MACHINERY
> REGULAR INSPECTIONS
> ENERGY EFFICIENCY OFOF LIFTING MACHINERY
OPERATIONS
QUALITY
+
ENVIRONMENT
+
Health and Safety at Work
+
SOCIAL RESPONSABILITY
+
Energy
+
We are a technically-skilled team that works with up-to-date knowledge and experience of the latest methods and best practices for quality management system consulting and auditing services.
As a business partner for companies, we drive the continuous improvement of their management processes, allowing them to achieve higher national and international quality standards and competitiveness.
> INNOVATION AND DEVELOPMENT MANAGEMENT SYSTEMS CONSULTANCY
> QUALITY AUDITS
> INNOVATION AND DEVELOPMENT MANAGEMENT SYSTEMS
> RISK MANAGEMENT
> MAINTENANCE MANAGEMENT
> QUALITY MANAGEMENT SYSTEMS
> QUALITY MANAGEMENT AND ENGINEERING
> IMPLEMENTATION OF NEW WORK METHODS
> 5’S METHODOLOGY
> INTEGRATED SYSTEM MANAGEMENT: QASR (QUALITY ASSURANCE STATUS REPORT)
> ORGANIZATION MANAGEMENT
> INTEGRATED SYSTEM MANAGEMENT SYSTEMS
> SUPPLIER QUALIFICATION
> INDUSTRIAL DIAGNOSTICS AND MANUFACTURING UNIT REORGANIZATION
Nowadays, environmental issues are an ever-growing concern. With the aim of building a sustainable world, IEP has developed a range of services that allow us to respond not only to legal requirements but also to provide companies with higher standards in their respect for an improved environment.
IEP, therefore, provides environmental consulting services (system implementation, environmental licensing), circular economy consulting, environmental characterization consulting (noise, gas emissions, effluents), equipment and product characterization consulting (energy label, ROHS), among others.
To carry out these services, IEP has a team of qualified technicians at its disposal, as well as the right equipment to allow it to respond effectively to its clients’ needs.
Many of the services offered are carried out by the several accredited laboratories that are part of this institute.
> INTEGRATED ASSESSMENT OF ENVIRONMENTAL RISKS/ENVIRONMENTAL RESPONSIBILITY
> INTEGRATED ASSESSMENT OF LEGAL ENVIRONMENTAL COMPLIANCE
> ROHS DIRECTIVE – DECREE-LAW NO. 230/2004
> ENVIRONMENTAL AND INDUSTRIAL LICENSING SUPPORT
> SEVESO DIRECTIVE
> ENVIRONMENT AND SUSTAINABILITY
> ENVIRONMENTAL AUDITS
> ENVIRONMENT AND WORKSITE SAFETY SUPERVISION
Over the last few decades, we have been part of major safety projects carried out in the business sector as well as in public network infrastructure.
We draft emergency plans and health and safety plans, assess industrial, technological and professional risks, and recommend self-protection measures.
We implement health and safety at work systems and carry out internal audits.
We are also responsible for the organization of external OSH services for national companies in every business sector.
> SAFETY AUDITS
> INTEGRATED ASSESSMENT OF OCCUPATIONAL HAZARDS
> INVESTIGATION OF WORK-RELATED INJURIES
> FIRE SAFETY
> SEVESO DIRECTIVE
> DRAFTING OF HEALTH AND SAFETY PLANS
> ENVIRONMENT AND WORKSITE SAFETY SUPERVISION
> COORDINATION OF WORK-SITE SAFETY
> INTEGRATED ASSESSMENT OF MACHINERY DIRECTIVE COMPLIANCE
> VISUAL INSPECTION OF WORK EQUIPMENT (DECREE-LAW 50/2005)
> INDUSTRIAL HYGIENE
> ATEX DIRECTIVE
> DRAFTING OF EMERGENCY PLANS
> HEALTH AND SAFETY AND WORK MANAGEMENT SYSTEMS
Over the last few decades we have taken social responsibility on as a core value for our organization’s strategy, and we are committed to sharing its importance with our business partners in order to promote ethical and transparent behavior.
Achieving the sustainable development of any organization requires a constant commitment to meeting the needs of the present, but never compromising the ability of future generations to meet their own needs.
As such, we help organizations with the development and design of corporate and social responsibility plans that take into account their business sector, maximizing the economic and social impact on organizations.
> SOCIAL RESPONSIBILITY
> SOCIAL RESPONSIBILITY MANAGEMENT SYSTEMS
Sensible energy consumption in human activities is of extreme importance since these resources are finite, extremely scarce and unequally distributed. Therefore, it is very important to provide tools to support the decision-making process, that also allows the various economic sectors to effectively manage the energy resources used in their activities.
> SOLAR PARK PERFORMANCE ASSESSMENT
> PROJECT ANALYSIS AND SUPERVISION OF RENEWABLE ENERGY INSTALLATIONS
> ENERGY AUDITS
> ENERGY EFFICIENCY DIAGNOSTICS OF BUILDINGS AND INSTALLATIONS
> REMOTE DRONE INSPECTIONS
> ENERGY CERTIFICATION
> ENERGY MANAGEMENT AND ENERGY EFFICIENCY
> ENERGY MANAGEMENT SYSTEMS
OPERATIONS
ELECTRIC AND ELECTRONIC PRODUCTS
+
ELECTROMAGNETIC COMPATIBILITY
+
ELECTROMAGNETIC FIELDS
+
ACOUSTICS AND VIBRATIONS
+
CONSTRUCTION
+
RADIATION AND RADIOCHEMISTRY
+
CLIMATE CONTROL MACHINERY AND FACILITIES
+
ENGINEERING MACHINERY, STRUCTURES AND PRODUCTS
+
The ever-increasing exchange of products on a global scale, so typical of today’s markets, has led to a need to encourage trust between everyone involved – manufacturers, consumers and official bodies – in a technically credible manner, but which is also compatible with a reduced “time to market” of most current products. This, in turn, has led to the increasing adoption of technical standards in the European Union’s regulations and in the legislation of its Member States, which have converged on essential product requirements. As such, there is a need to assess compliance of electrical and electronic products in order to be granted the CE marking required in the European market, covering safety requirements (Low Voltage Directive), electromagnetic compatibility (EMC Directive) and energy efficiency (EcoDesign and Energy Labeling Directives), among others.
IEP’s laboratories provide manufacturers with a wide range of electrical and electronic product testing, based on European and international standards, for assessment of the compliance of these products.
These laboratories are accredited by the Portuguese Institute for Accreditation – IPAC. Thanks to the EA and ILAC agreements, of which Portugal is a signatory, the tests carried out by IEP are officially recognized throughout the world.
IEP’s laboratories are also recognized in Europe by ETICS – European Testing, Inspection and Certification System (ENEC, KEYMARK and CCA agreements) and internationally by the IECEE – International Electrotechnical Commission System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (CB agreements). Thanks to these agreements, manufacturers that turn to IEP for the certification of their electrical and electronic products have direct access to the certification marks used in many other countries.
Check here our list of tests under intermediate flexible accreditation.
> CLIMATIC, MECHANICAL AND VIBRATION TESTING
Electromagnetic Compatibility (EMC) is the ability of electrical and electronic equipment to operate properly and as expected in their intended electromagnetic environment, without causing electromagnetic disturbances that interfere with other nearby equipment.
In Europe, all electronic devices, whether powered by the electricity grid or batteries, must comply with Directive 2014/30/EU Electromagnetic Compatibility Directive (EMC) – unless they have some form of intentional radio frequency communication, in which case their electromagnetic compatibility comes under the scope of Directive 2014/53/EU Radio Equipment Directive (RED). These Directives (EMC and RED) aim to ensure that electrical and electronic equipment have adequate levels of immunity while not causing disturbances that are too high.
IEP’s laboratories have more than three decades’ experience of assessing EMC phenomena in electrical and electronic equipment, supporting manufacturers at all stages of the product development cycle, from design to their compliance certification with applicable standards and directives.
> IMMUNITY
> EMISSION
Human exposure to electromagnetic fields is an increasing concern, both for health authorities and for the general population.
Current regulations on the protection of individuals from the health and safety risks that may result from exposure to electromagnetic fields, with a particular focus on occupational exposure, require assessments of this physical agent.
IEP’s laboratory has extensive experience in this type of assessment and is accredited by IPAC to carry out tests under the scope of ministerial order 1421/2004 and Directive 2013/35/EU (transposed in Portugal by Law 64/2017).
> ASSESSMENT OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS
Environmental (Assessment of compliance with the General Noise Regulation – Decree-Law 9/2007 – for permanent and temporary noisy activities, Discomfort assessment tests and maximum exposure criteria, Preparation of acoustic data collections within the scope of previous assessment).
Management and monitoring of noise in the environment (Drafting of noise maps, Drafting of noise reduction plans, Development of detailed plans for the assessment of environmental impact, Concept and design of tailormade noise monitoring networks, Environmental Consulting for sound environments).
Construction (Assessment of compliance of construction and construction components within Decree-Law 96/2008, Sound insulation testing for airborne and percussive sounds, Facade insulation testing, Reverberation time testing, collective equipment testing), Product design (Evaluation of products’ sound power levels).
Occupational (Assessment of human exposure to noise and vibrations in the workplace – Decree-Law 182/2006 and Decree-Law 42/2006, Drafting of noise maps for industrial facilities, Drafting of noise and vibration control plans in the workplace).
> AMBIENT NOISE – DISCOMFORT CRITERIA
> AMBIENT NOISE – EQUIVALENT CONTINUOUS SOUND LEVEL
> WORKERS’ VIBRATION EXPOSURE
> DRAFTING OF NOISE MAPS, NOISE REDUCTION PLANS AND DETAILED SURVEYS
> AMBIENT NOISE – MAXIMUM EXPOSURE CRITERIA
> NOISE AND VIBRATIONS IN TRANSPORT – SHIPS, TRAINS, AND OTHERS
> DRAFTING OF SOUNDPROOFING PLANS
> WORKERS’ NOISE EXPOSURE IN THE WORKPLACE
SAFETY
Low voltage directive, fitness for use, energy consumption, functioning, climatic and mechanical robustness, fire, salt fog, degrees of protection – IP and IK.
> TRACK SYSTEMS (METAL RAILS) FOR WIRING
> PIPES FOR ELECTRICAL PLUMBING
> INSULATING RAILS FOR ELECTRICAL INSTALLATIONS
> SALT FOG
OPTICAL RADIATION
Assessment of human exposure to artificial (incoherent) optical radiation at the workplace.
> SOURCES OF ARTIFICIAL OPTICAL RADIATION – EXPOSURE TO INCOHERENT RADIATION
TEMPERATURE AND HUMIDITY CALIBRATIONS
Tests are performed to determine the thermal profiles (stability and gradient) of a variety of equipment, such as greenhouses, thermo-regulated baths, ovens, muffles, and cold storage rooms.
Many of these tasks can be carried out on the client’s premises – in situ -, thus ensuring the lowest possible downtime.
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – GREENHOUSES
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – CLIMATIC CHAMBERS
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – MUFFLES
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – BATHS
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – OVENS
> STUDY OF TEMPERATURE UNIFORMITY AND STABILITY – GREENHOUSES
SAFETY
Low voltage directive, fitness for use, energy consumption, functioning, climatic and mechanical robustness, fire, salt fog, degrees of protection – IP and IK.
> SAFETY AND PROFESSIONAL FOOTWEAR. INSULATION DETERMINATION TESTS (LEAKAGE CURRENT AND DIELECTRIC STIFFNESS) ON BOOTS
> SOLID INSULATING MATERIALS – FIRE HAZARD TESTING
> INSULATION MATERIALS – SURFACE AND VOLUME RESISTIVITY
OPERATIONS
ELECTRICITY
+
TEMPERATURE AND HUMIDITY
+
TIME AND FREQUENCY
+
MASS AND WEIGHING INSTRUMENTS
+
PRESSURE
+
MANAGEMENT OF CALIBRATION PLANS
+
ELECTRICAL AND FREQUENCY CALIBRATION
In this area IEP is accredited to carry out equipment calibration of the following:
Electricity and Time / Frequency (DC Voltage, AC Voltage, Resistance, DC Current, AC Current, Frequency / Time, Electrical Phase / Angle, DC Power, AC Active Power, Capacity, Inductance, Harmonic Distortion) AM modulation, FM modulation).
> CONDUCTOMETERS
> IMPEDANCE BRIDGES
> ENERGY ANALYZERS
> ELECTRICAL TESTING STATIONS
> COMMUNICATIONS ANALYZERS
> SPECTRUM ANALYZERS
> THERMOCOUPLE CALIBRATORS
> POWER SUPPLIES
> HOOK-ON METERS
> MILIOHMMETERS
> RESISTOR BOXES
> OHMMETER
> VOLTMETER
> LOW FREQUENCY
> OTHERS
> LCR METERS
> POWER/HARMONICS ANALYZERS
> INSTALLATION TESTERS
> MULTIFUNCTIONAL CALIBRATORS
> SIGNAL GENERATORS
> PROCESS CALIBRATORS
> TEMPERATURE SIMULATORS
> OSCILLOSCOPES
> MULTIMETERS
> MEGOHMMETERS
> EARTH METERS
> AMMETER
> HIGH FREQUENCY
> DIRECT CURRENT
TEMPERATURE AND HUMIDITY CALIBRATIONS
In the area of temperature, IEP is accredited to calibrate liquid-in-glass thermometers and digital thermometers (electronic reading units, associated with thermocouple sensors, Pt100, etc.).
Tests are performed to determine the thermal profiles (stability and gradient) of various types of equipment, such as greenhouses, thermo-regulated baths, ovens, muffles, cold storage rooms.
Many of these tasks can be carried out on the client’s premises – in situ -, thus ensuring the lowest possible downtime.
> LABORATORY AND ONSITE CALIBRATIONS
> HYGROMETER
> THERMAL CAMERAS
> DIGITAL THERMOMETERS
> TEMPERATURE SENSORS (PT-100, THERMOCOUPLES, AND OTHERS)
> LABORATORY AND ONSITE CALIBRATIONS
> HYGROGRAPHS
> THERMO-HYGROMETERS AND THERMO-HYGROGRAPHS
> TEMPERATURE AND DATA LOGGERS
> GLASS THERMOMETERS
> DRY-BLOCK CALIBRATORS
> OTHERS
ELECTRICAL AND FREQUENCY CALIBRATION
IEP is accredited to carry out equipment calibration of the following: Electricity and Time/Frequency (DC Voltage, AC Voltage, Resistance, DC Current, AC Current, Frequency/Time, Electrical Phase/Angle, DC Power, AC Active Power, Capacity, Inductance, Harmonic Distortion).
RF and Microwaves (RF Power, AM Modulation, FM Modulation).
> TACHYMETERS
> CHRONOMETERS
> GENERATORS
> OTHERS
> TIME INTERVAL METERS
> SIGNAL ANALYZERS
>FREQUENCY METERS
Mass (Weighing Instruments, scales)
> SCALES
> PRESSURE GAUGES
> COMPOUND PRESSURE GAUGES
In addition to equipment calibrations, IEP also provides other complementary services such as management of calibration plans (planning the company’s equipment calibrations, recall service as a reminder of upcoming calibration dates, etc.).
OPERATIONS
ENERGY EFFICIENCY OF INDUSTRY AND BUILDINGS
+
ENERGY PRODUCTION SYSTEMS
+
REMOTE DRONE INSPECTIONS
+
DUE DILIGENCE OF LARGE INFRASTRUCTURE
+
Energy and the way it is used should be seen as a company cost component that can be reduced. IEP has experienced and skilled technical staff that is able to set targets, alongside its organization, for reducing consumption, thus increasing its energy efficiency.
> ASSESSMENT OF THE ENERGY PERFORMANCE AND EFFICIENCY OF BUILDINGS
> DRAFTING OF ENERGY RATIONING PLANS
> ASSESSMENT OF ENERGY PERFORMANCE AND EFFICIENCY IN INDUSTRIES
> ASSESSMENT OF ENERGY PERFORMANCE AND EFFICIENCY FOR FLEETS
> ASSESSMENT OF THE ENERGY PERFORMANCE AND CONSUMPTION OF BUILDINGS
> ISSUANCE OF ENERGY CERTIFICATES
> ENERGY AUDITS UNDER DECREE-LAW 68-A/2015
> MONITORING AND EVOLUTION OF ENERGY CONSUMPTION INDICATORS AND DRAFTING OF PROGRESS AND EXECUTION REPORTS
Focusing on renewable energies and the decarbonization of the economy, IEP has skilled staff and the proper equipment to inspect your energy production systems in detail, to ensure better energy performance and a higher return on investment. Our staff’s skills allow for continuous monitoring, from the design and construction stages to the operation and maintenance stages.
> MONITORING AND OVERSIGHT OFF RENEWABLE ENERGY PRODUCTION SYSTEMS
> ASSESSMENT OF PROPOSALS FROM INSTALLERS OF RENEWABLE ENERGY PRODUCTION SYSTEMS
> VISUAL AND THERMOGRAPHY INSPECTIONS OF SOLAR PARKS
> SOLAR PARK PERFORMANCE ASSESSMENT
> QUALITY CONTROL OF PHOTOVOLTAIC PANELS AT THE TIME OF DELIVERY, PERFORMED IN A MOBILE LABORATORY (IR AND EL IMAGE)
> WIND FARM ASSESSMENT: NON-DESTRUCTIVE TESTING (VISUAL, ULTRASOUND, THERMOGRAPHY, AND OTHERS – WHEN APPLICABLE)
> ASSESSMENT OF THE IMPLEMENTATION OF RENEWABLE ENERGY PRODUCTION SYSTEMS
> REMOTE UAV INSPECTIONS FORFOR THE THERMOGRAPHY ANALYSIS OF PHOTOVOLTAIC PANELS, WITH GEOREFERENCING IDENTIFICATION
> INSPECTION OF PHOTOVOLTAIC MODULES VIA ELECTROLUMINESCENCE AND I-V CURVES
> FINAL TESTING (OVERSIGHT SUPPORT) BEFORE DELIVERY TO THE INSTALLING TEAM. PROVISIONAL ACCEPTANCE CERTIFICATE
> PERFORMANCE ASSESSMENT OF THERMAL ENERGY PRODUCTION SYSTEMS, AND ASSESSMENT OF THE IMPLEMENTATION AND EXECUTION OF PREVENTIVE MAINTENANCE PLANS
> WIND FARM ASSESSMENT: VISUAL AND THERMOGRAPHICAL UAV INSPECTIONS
IEP provides UAV (Unmanned Aerial Vehicle) remote inspection services. These consist of visual and thermographic inspections, with georeferencing identification, along with photographic and/or video records and subsequent analysis of any anomalies found. This service is extremely advantageous, as it allows inspections of hard-to-reach places or very large sites.
Thermographic Inspection in Solar Parks
Visual Inspection of Wind Turbines
> WINDFARMS
> TELECOMMUNICATIONS TOWERS
> SOLAR PARKS
> CHIMNEYS, PORTS, BRIDGES AND VIADUCTS
IEP has extensive technical, standardization and regulatory experience within the electrical, telecommunications, and infrastructure sectors. We propose to make our experience available to the market in valuing renewable energy production assets (solar and wind power), both for new infrastructure (project valuation, construction supervision, final acceptance and validation of yearly production estimates) and for existing infrastructure being sold (standards and regulatory compliance, conservation and maintenance, performance analysis, etc.).
OPERATIONS
LIQUID PENETRANTS
+
MAGNETIC PARTICLES
+
X-RAY
+
DIGITAL X-RAY
+
(UT) ULTRASONIC TESTING
+
ULTRASONIC THICKNESS MEASUREMENT
+
VISUAL INSPECTION
+
INDUCED CURRENTS (EDDY OR FOUCAULT CURRENTS)
+
PHASED ARRAY (PAUT)
+
APR - ACOUSTIC PULSE REFLECTOMETRY
+
LEAK TEST
+
A test that allows the detection of surface discontinuities in non-porous materials.
By using visible or fluorescent systems that can be removed by water or by solvent, we conduct tests according to European and international standards and also according to client-specific procedures in all areas of metalworking – welding, casting and forging, among others.
> METALLIC MATERIAL WELDING
> METALLIC MATERIALS
> FORGED METAL PARTS
A test that detects surface discontinuities in ferromagnetic materials. Using different magnetization techniques – Yoke, Permanent Magnet, Coil and Direct Current – and according to recognized standards, we carry out the tests both at our facilities and at the client’s premises.
> FERROMAGNETIC METALLIC MATERIALS
> FERROMAGNETIC METALLIC MATERIAL WELDING
> FERROMAGNETIC FORGED METAL PARTS
INDUSTRIAL X-RAY
AJL provides a wide range of x-ray services for a wide range of applications and industries.
Gamma Radiation (Iridium source and Selenium source) and X-Ray equipment (up to 300 kV) are used for welding (piping or pressure equipment), cast or forged.
> METALLIC MATERIAL WELDING
> METALLIC MATERIALS
> CAST METALLIC MATERIAL PARTS
Digital X-ray is a form of X-ray imaging where digital sensors are used instead of traditional radiographic film. Some of its advantages include:
– Reduced exposure;
– A smaller safety perimeter;
– No need for films or chemicals associated with traditional image development.
> METALLIC MATERIAL WELDING
> METALLIC MATERIALS
Ultrasonic testing can range from basic thickness measurements to large-scale inspections to welding or forged components. Some of the industrial sectors where this kind of testing can be useful are Automotive, Railways, Shipbuilding, Aerospace, Nuclear, Oil & Gas, Petrochemical, Thermoelectric.
> METALLIC MATERIAL WELDING
> FORGED METAL PARTS
> ROLLED STEEL
> CAST METALLIC MATERIAL PARTS
> METALLIC MATERIALS
Ultrasonic testing can range from basic thickness measurements to large scale inspections to welds or forged components. Some of the industrial sectors where this kind of testing can be useful are: Automotive, Railways, Shipbuilding, Aerospace, Nuclear, Oil & Gas, Petrochemical, Thermoelectric.
> NON-METALLIC MATERIALS
> METALLIC MATERIALS
Visual inspection is the preferred method of non-destructive examination to ensure that the welding process is executed correctly and according to applicable standards. AJL always strives to innovate when it comes to NDT methods. It has a portable three-dimensional laser measurement system at its disposal for the visual inspection of welds. This simplifies the inspection process and ensures the best testing practices.
Induced currents are a conductive material inspection technique to detect surface cracks, pitting, thickness loss and other discontinuities. Some of its advantages include:
– The ability to inspect hard-to-reach places;
– A wide range of applications such as tubular beam inspections of heat exchangers within the fossil fuel and petrochemical industries.
The Phased Array technique is an advanced ultrasonic inspection technique that allows for the detection of internal defects. Phased Arrays produce clear, reliable and precise images in a quick and efficient manner. This technique is seen as a viable alternative to X-rays.
Acoustic Pulse Reflectometry is a technology based on the emission of an acoustic pulse and the reception of the reflected acoustic wave. APR is used to accurately detect blockages (either total or partial), corrosion, erosion, perforations and pittings.
A leak test can be performed using several techniques. European standard EN 1779:1999 sets out 17 techniques, which can be grouped into five categories. Depending on the chosen technique, the test’s sensitivity can vary. The aforementioned standard also defines the limits normally obtained from industrial tests.
CAN WE HELP?
If you need information about our services, please contact us with your questions.